Yodify Product Library
Add the DAG-S/M Digital Indicator & Controller to your store or catalog
Book Your Demo and See How
or create your store
DAG-S/M Digital Indicator & Controller
Brand: KOBOLD Instruments, Inc
KOBOLD digital indicators and controllers for measurement of temperature, current and voltage. The measuring input is set at the factory. The dimension symbols can be adapted with interchangeable plates.
Features- 5-digit LED (red, green, orange, blue and tricolor)
- Input: temperature, current, voltage, and frequency
- 1(2) Analog output
- 2(4) contacts, minimum/maximum memory
- RS232 or RS485 interface
- 30 additional adjustable setpoints, zero-key for Hold, Tara, zero-point tranquilizing
- Volume measuring (totalisator)
Specifications
Brand
Cable Length
- 10 ft (3 m) - max.
- 3,281 ft (1000 metres)
Cold Junction Reference
- Thermistor
Communication
- Baud Rate: 9,600 bit/sec
Display
- 0.1 to 10.0 seconds - Display Time
- 5-Digit, 7-Segment, 14 mm High, Red, Green, Blue, or Orange LED
- Horizontal bar (Up/Down)
Electrical Connectors
- Plug Terminals Cable Cross-Section up to 2.5 mm²
Electrical Contacts
- N/O Contact
- Optical Display Flashing Relay (Changeover Contact), 250 Vac / 5 A, 30 Vdc / 5 A
Enclosure, Body Material
- Polycarbonate, Black
Environmental Protection
- IP00 - Terminal
- IP65 - Front
Frequency
- 0.01 Hz to 99,999 kHz
Gasket Material
- EPDM
Humidity
- 0 to 85 % RH, Non-Condensing
Input
- 0-10 Vdc - Measuring Input
- 0-20 mA - Measuring Input
- 4-20 mA - Measuring Input
Input Signal
- 3-Wire Initiator PNP/NPN - Frequency
- NAmur - Frequency
- Pulse Input - Frequency
- TTL - Frequency
Interface Connection
- 9,600 Baud Rate, No Parity, 8 Databit, 1 Stopbit
- RS-232 Serial Interface
- RS-485
Measuring Error
- 0.05 % of Measuring Range
- 0.1 % of Measuring Range ± 1-Digit
- 2 K, ± 1-Digit (Thermocouple)
Measuring Range
- 0(4)-20 mA / 0-10 Vdc (Direct Current/Voltage)
- -200° to 850° C (-328° to 1562° F) (Pt100)
Measuring Span
- -22 to 24 mA / -12 to 12 V (Direct Current/Voltage)
Measuring Time
- 0.1 to 10.0 seconds
Mounting
- Pluggable Screw Elements up to Wall Thickness 3 mm
Operating Temperature
- 0° to 50° C (32° to 122° F)
Output
- 0-10 Vdc - Analog Output
- 4-20 mA or 0-20 mA - Analog Output
- Maximum
Resistance
- Ri at ~100 ohms (At 0(4) - 20 mA) - Input Resistance
- Ri at ~200 kΩ (At 0-10 Vdc) - Input Resistance
- Ri at 24 V / 4 kΩ - Input Resistance (Frequency)
Resolution
- 0.1° C or 0.1° F - Thermocouple
- Approximately 18-bit at 1 seconds Measuring Time
Sensor / Probe Type
- Direct Current/Voltage
- Pt100
- Thermocouples: L, J, K, B, S, N, E, T, R
Sensor Circuit
- 10 Vdc / 20 mA (DAG-S4 / DAG-M1)
- 10 Vdc / 50 mA (DAG-M3 / DAG-M4)
Storage Temperature
- -20° to 80° C (-4° to 176° F)
Supply Voltage
- 100-240 Vac, 50/60 Hz ± 10 % (DAG-M)
- 100-240 Vdc ± 10 %, Max.
- 10-30 Vdc Galanic Separated, Max.
- 10-40 Vdc Galvanic Separated (DAG-M & DAG-S)
- 115 Vac (DAG-S4)
- 18-30 Vac, 50/60 Hz, Max.
- 20 VA, Max.
- 230 Vac ± 10 %, Max.
- 24 Vdc Galvanic Separated, Max.
Temperature Range
- -328° to 1820° C (-558° to 3308° F) - Measuring Input (Thermocouple)
Thermal Drift
- 100 ppm/K