Yodify Product Library
Add the STAA3 Sanitary RTD Probe Assembly to your store or catalog
Book Your Demo and See How
or create your store
STAA3 Sanitary RTD Probe Assembly
Brand: Tel-Tru Manufacturing Co.Features and options:
- Probe: 316L Stainless steel with tri-clamp CIP fitting
- 4-20 mA 2-wire loop-powered output, with single element thin film Pt100 3-wire RTD, accuracy class A ±0.06% at 0° C (32° F) (coefficient 0.00385)
- Measurement range: -50° to 160° C (-60° to 300° F)
- Sanitary standard: Meets 3-A sanitary standard 74-06 requirements
- High accuracy, long term stability, consistent repeatability
- Fast response time
- All-welded construction
- Direct installation into process piping
- Models integrated with a compact transmitter
- High-gloss polished finish to 2µin. available
Specifications
Accuracy
- ± (0.10° C (0.18° F) + 0.10 % of Calibrated Span) with Two Point Calibration
- ± (0.25° C (0.45° F) + 0.40 % of Span) with One-Point Calibration
- Class A ± 0.06 % at 0° C (32° F) (Coefficient 0.00385)
Applications
- Chemical Plants
- Food & Dairy Processing
- Gas Pipelines
- Paper Mills
- Petrochemical Plants
- Pharmaceutical Industries
- Refineries
- Utilities
Approvals & Certifications
- Pt100: IEC 751 Class A
Approvals & Certifications
- 3-A Sanitary Standard 74-06
Delay Time
- Switch on Delay: 2 seconds
Electrical Connectors
- M12 Plug, 4-Pin
Enclosure, Body Material
- 316 Stainless Steel
Environmental Protection
- IP67
- NEMA 6
Insertion 'U' Length
- 1" (2.54 cm) min.
Isolation
- 500 Vdc Input/Output
Operating Pressure
- psi: 1,500 (kPa: 10,340, bar: 103) - Max.
- psig: 500 (kPa: 3,447, bar: 34.47) - Tri-Clamp
Operating Temperature
- -40° to 80° C (-40° to 176° F)
Output
- 4-20 mA, 2-wire Loop-Powered
Power Supply
- 9-32 Vdc, Polarity Protected
Power Supply Effect
- 0.001 %/V
Response Time
- Electronic: 1 second at Startup
RFI/EMI Effect
- RFI Effect: 1 % or Less Typical
Sensor Circuit
- Sensor Open Circuit (Downscale): 2.5 mA
- Sensor Open Circuit (Upscale): 24 mA
Sensor, Probe Diameter
- Probe: 0.187" (4.75 mm)
- Probe: 0.250" (6.35 mm)
Sensor, Probe Length
- Probe: 2.5" to 18" (63.5 to 457.2 mm)
Sensor, Probe Material
- 316L Stainless Steel with Tri-Clamp CIP Fitting
Sensor, Probe Type
- Thin Film Pt100 3-Wire RTD
Span - Minimum
- Sensor: 25° C (45° F)
Storage Temperature
- -40° to 80° C (-40° to 176° F)
Temperature Effect
- ± 0.001 % of Span/°C
Temperature Range
- Sensor: -50° to 150° C (-58° to 302° F)
Termination
- M12 without or with Mating Connection & Cable
Tri-Clamp Connection
- 1" Sanitary Clamp
- 1/2" Sanitary Clamp
- 1-1/2" Sanitary Clamp
- 2" Sanitary Clamp
- 2-1/2" Sanitary Clamp
- 3/4" Sanitary Clamp